7
Generic Connectivity

This chapter describes the configuration and usage of Generic Connectivity agents.

This chapter contains these topics:

• What Is Generic Connectivity?
• Supported Oracle SQL Statements and Functions
• Configuring Generic Connectivity Agents
• ODBC Connectivity Requirements
• OLE DB (SQL) Connectivity Requirements
• OLE DB (FS) Connectivity Requirements

What Is Generic Connectivity?

Generic Connectivity is intended for low-end data integration solutions requiring the ad hoc query capability to connect from an Oracle database server to non-Oracle database systems.

Generic Connectivity is implemented as either a Heterogeneous Services ODBC agent or a Heterogeneous Services OLE DB agent. An ODBC agent and OLE DB agent are included as part of your Oracle system. ODBC agents are supported on Solaris, HP-UX, AIX, and Windows NT platforms. OLE DB agents are supported only on the Windows NT platform.

Any data source compatible with the ODBC or OLE DB standards described in this chapter can be accessed using a Generic Connectivity agent.

This section contains the following topics:

• Types of Agents
• Generic Connectivity Architecture
• SQL Execution
• Datatype Mapping
• Generic Connectivity Restrictions

Types of Agents

Generic Connectivity is implemented as one of the following types of Heterogeneous Services agents:

• ODBC agent for accessing ODBC data providers
• OLE DB agent for accessing OLE DB data providers that support SQL processing--sometimes referred to as OLE DB (SQL)
• OLE DB agent for accessing OLE DB data providers without SQL processing support--sometimes referred to as OLE DB (FS)

Each user session receives its own dedicated agent process spawned by the first use in that user session of the database link to the non-Oracle system. The agent process ends when the user session ends.

Generic Connectivity Architecture

To access the non-Oracle data store using Generic Connectivity, the agents work with an ODBC or OLE DB driver. The Oracle database server provides support for the ODBC or OLE DB driver interface. The driver that you use must be on the same platform as the agent. The non-Oracle data stores can reside on the same machine as the Oracle database server or on a different machine.

Oracle and Non-Oracle Systems on Separate Machines

Figure 7-1 shows an example of a configuration in which an Oracle and non-Oracle database are on separate machines, communicating through a Heterogeneous Services ODBC agent.

Figure 7-1 Oracle and Non-Oracle Systems on a Separate Machines

Text description of the illustration heter004.gif

In this configuration:

1. A client connects to the Oracle database server through Oracle Net.
2. The Heterogeneous Services component of the Oracle database server connects through Oracle Net to the Heterogeneous Services ODBC agent.
3. The agent communicates with the following non-Oracle components:
   • An ODBC driver manager
   • An ODBC driver
   • A non-Oracle client application

This client connects to the non-Oracle data store through a network.

Oracle and Non-Oracle Systems on the Same Machine

Figure 7-2 shows an example of a different configuration in which an Oracle and non-Oracle database are on the same machine, again communicating through an Heterogeneous Services ODBC agent.

Figure 7-2 Oracle and Non-Oracle Systems on the Same Machine

Text description of the illustration heter005.gif

In this configuration:

1. A client connects to the Oracle database server through Oracle Net.
2. The Heterogeneous Services component of the Oracle database server connects through Oracle Net to the Heterogeneous Services ODBC agent.
3. The agent communicates with the following non-Oracle components:
   • An ODBC driver manager
   • An ODBC driver

The driver then allows access to the non-Oracle data store.

SQL Execution

SQL statements sent using a Generic Connectivity agent are executed differently depending on the type of agent you are using: ODBC, OLE DB (SQL), or OLE DB (FS). For example, if a SQL statement involving tables is sent using an ODBC agent for a file-based storage system, the file can be manipulated as if it were a table in a relational database. The naming conventions used at the non-Oracle system can also depend on whether you are using an ODBC or OLE DB agent.

Datatype Mapping

The Oracle database server maps the datatypes used in ODBC and OLE DB compliant data sources to supported Oracle datatypes. When the results of a query are returned, the Oracle database server converts the ODBC or OLE DB datatypes to Oracle datatypes. For example, the ODBC datatype SQL_TIMESTAMP and the OLE DB datatype DBTYPE_DBTIMESTAMP are converted to Oracle's DATE datatype.

If a table contains a column whose datatype is not supported by Generic Connectivity, then the column information is not returned to the Oracle server.

Generic Connectivity Restrictions

Generic Connectivity restrictions include:

• A table including a BLOB column must have a separate column that serves as a primary key.
• BLOB and CLOB data cannot be read through passthrough queries.
• Updates or deletes that include unsupported functions within a WHERE clause are not allowed.
• Generic Connectivity does not support stored procedures.
• Generic Connectivity agents cannot participate in distributed transactions; they support single-site transactions only.
• Generic Connectivity does not support multithreaded agents.

Supported Oracle SQL Statements and Functions

Generic Connectivity supports the following statements, but only if the ODBC or OLE DB driver and non-Oracle system can execute them and the statements contain supported Oracle SQL functions:

• DELETE
• INSERT
• SELECT
• UPDATE

Only a limited set of functions are assumed to be supported by the non-Oracle system. Most Oracle functions have no equivalent function in this limited set. Consequently, although post-processing is performed by the Oracle database server, many Oracle functions are not supported by Generic Connectivity, possibly impacting performance.

If an Oracle SQL function is not supported by Generic Connectivity, then this function is not supported in DELETE, INSERT, or UPDATE statements. In SELECT statements, these functions are evaluated by the Oracle database server and post-processed after they are returned from the non-Oracle system.

If an unsupported function is used in a DELETE, INSERT, or UPDATE statement, it generates this Oracle error:

ORA-02070: database db_link_name does not support function in this context

Generic Connectivity assumes that the following minimum set of SQL functions is supported by the ODBC driver or OLE DB provider that is being used:

• AVG(exp)
• LIKE(exp)
• COUNT(*)
• MAX(exp)
• MIN(exp)
• NOT

Configuring Generic Connectivity Agents

To implement Generic Connectivity on a non-Oracle data source, you must set the agent parameters.

This section contains the following topics:

• Creating the Initialization File
• Editing the Initialization File
• Setting Initialization Parameters for an ODBC-based Data Source
• Setting Initialization Parameters for an OLE DB-based Data Source

Creating the Initialization File

You must create and customize an initialization file for your Generic Connectivity agent. Oracle Corporation supplies sample initialization files, inithsodbc.ora for ODBC agents and inithsoledb.ora for OLE DB agents. The sample files are stored in the $ORACLE_HOME/hs/admin directory.

To create an initialization file for an ODBC or OLE DB agent, copy the applicable sample initialization file and rename the file to initHS_SID.ora, where HS_SID is the system identifier you want to use for the instance of the non-Oracle system to which the agent connects.

The HS_SID is also used to identify how to connect to the agent when you configure the listener by modifying the listener.ora file. The HS_SID you add to the listener.ora file must match the HS_SID in an initHS_SID.ora file, because the agent spawned by the listener searches for a matching initHS_SID.ora file. That is how each agent process gets its initialization information. When you copy and rename your initHS_SID.ora file, ensure it remains in the $ORACLE_HOME/hs/admin directory.

Editing the Initialization File

Customize the initHS_SID.ora file by setting the parameter values used for Generic Connectivity agents to values appropriate for your system, agent, and drivers. You must edit the initHS_SID.ora file to change the HS_FDS_CONNECT_INFO initialization parameter. HS_FDS_CONNECT_INFO specifies the information required for connecting to the non-Oracle system.

Set the parameter values as follows:

[SET][PRIVATE] parameter=value

[SET] and [PRIVATE] are optional keywords. If you do not specify either SET or PRIVATE, then the parameter and value are simply used as an initialization parameter for the agent.

SET specifies that in addition to being used as an initialization parameter, the parameter value is set as an environment variable for the agent process.

PRIVATE specifies that the parameter value is private and not transferred to the Oracle database server and does not appear in V$ tables or in an graphical user interfaces.

SET PRIVATE specifies that the parameter value is set as an environment variable for the agent process and is also private (not transferred to the Oracle database server, not appearing in V$ tables or graphical user interfaces).

parameter is the Heterogeneous Services initialization parameter that you are specifying. See "Setting Initialization Parameters" for a description of all Heterogeneous Services parameters and their possible values. The parameter is case-sensitive.

value is the value you want to specify for the Heterogeneous Services parameter. The value is case-sensitive.

For example, to enable tracing for an agent, set the HS_FDS_TRACE_LEVEL parameter as follows:

HS_FDS_TRACE_LEVEL=ON

Typically, most parameters are only needed as initialization parameters, so you do not need to use SET or PRIVATE. Use SET for parameter values that the drivers or non-Oracle system need as environment variables.

PRIVATE is only supported for the follow Heterogeneous Services parameters:

• HS_FDS_CONNECT_INFO
• HS_FDS_SHAREABLE_NAME
• HS_FDS_TRACE_LEVEL

You should only use PRIVATE for these parameters if the parameter value includes sensitive information such as a username or password.

Setting Initialization Parameters for an ODBC-based Data Source

The settings for the initialization parameters vary depending on the type of operating system.

Setting Agent Parameters on Windows NT

Specify a file data source name (DSN) or a system DSN which has previously been defined using the ODBC Driver Manager.

Specify the value as follows:

HS_FDS_CONNECT_INFO=dsn

Setting Parameters on NT: Example

Assume a system DSN has been defined in the Windows ODBC Data Source Administrator. In order to connect to this SQL Server database through the gateway, the following line is required in initHS_SID.ora:

HS_FDS_CONNECT_INFO=sqlserver7

where sqlserver7 is the name of the system DSN defined in the Windows ODBC Data Source Administrator.

The following procedure enables you to define a system DSN in the Windows ODBC Data Source Administrator, version 3.5:

1. From the Start menu, choose Settings > Control Panel and select the ODBC icon.
2. Select the system DSN tab to display the system data sources.
3. Click Add.
4. From the list of installed ODBC drivers, select the name of the driver that the data source will use. For example, select SQL Server.
5. Click Finish.
6. Enter a name for the DSN and an optional description. Enter other information depending on the ODBC driver. For example, for SQL Server enter the SQL Server machine.

   Note: The name entered for the DSN must match the value of the parameter HS_FDS_CONNECT_INFO that is specified in initHS_SID.ora.

7. Refer to your ODBC driver documentation and follow the prompts to complete configuration of the DSN.
8. After creating the system DSN, click OK to exit the ODBC Data Source Administrator.

Setting Agent Parameters on UNIX platforms

Specify a DSN and the path of the ODBC shareable library, as follows:

HS_FDS_CONNECT_INFO=dsn_value
HS_FDS_SHAREABLE_NAME=full_path_of_odbc_driver

If your ODBC driver requires an ODBC driver manager, then HS_FDS_SHAREABLE_NAME should point to the location of the ODBC driver manager and not to the ODBC driver.

HS_FDS_CONNECT_INFO is required for all platforms for an ODBC agent. HS_FDS_SHAREABLE_NAME is required on UNIX platforms for an ODBC agent. Other initialization parameters have defaults or are optional. You can use the default values and omit the optional parameters, or you can specify the parameters with values tailored for your installation.

Setting Parameters on UNIX: Example

The following is an example of an odbc.ini file that uses DataDirect Technologies SQLServer ODBC driver:

[ODBC Data Sources]
SQLServerWP=DataDirect 4.10 SQL Server Wire Protocol

[SQLServerWP]
Driver=/opt/odbc410/lib/ivmsss18.so
Description=DataDirect 4.10 SQL Server Wire Protocol
Database=oratst
LogonID=TKHOUSER
Password=TKHOUSER
Address=sqlserver-pc,1433
QuotedId=No
AnsiNPW=No

[ODBC]
Trace=0
TraceFile=/opt/odbc410/odbctrace.out
TraceDll=/opt/odbc410/lib/odbctrac.so
InstallDir=/opt/odbc410
ConversionTableLocation=/opt/odbc410/tables
UseCursorLib=0

To configure the Generic Connectivity ODBC agent to use this driver, the following lines are required in initHS_SID.ora:

HS_FDS_CONNECT_INFO=SQLServerWP
HS_FDS_SHAREABLE_NAME=/opt/odbc4/lib/libodbc.so
set ODBCINI=/opt/odbc/odbc.ini

Note that the set statements are optional as long as they are specified in the working account. Each database has its own set statements.

The HS_FDS_CONNECT_INFO parameter value must match the ODBC data source name in the odbc.ini file.

Setting Initialization Parameters for an OLE DB-based Data Source

You can only set these parameters on the Windows NT platform.

Specify a data link (UDL) that has previously been defined:

SET|PRIVATE|SET PRIVATE HS_FDS_CONNECT_INFO="UDLFILE=data_link"

HS_FDS_CONNECT_INFO is required for an OLE DB agent. Other initialization parameters have defaults or are optional. You can use the default values and omit the optional parameters, or you can specify the parameters with values tailored for your installation.

ODBC Connectivity Requirements

To use an ODBC agent, you must have an ODBC driver installed on the same machine as the Oracle database server. On Windows NT, you must have an ODBC driver manager also located on the same machine. The ODBC driver manager and driver must meet the following requirements:

• On Windows NT machines, a 32-bit ODBC driver that conforms to ODBC version 2.5 is required.
• On UNIX machines, a 32-bit ODBC driver which conforms to ODBC version 2.5 is required. If the ODBC driver works with an ODBC driver manager that conforms to ODBC version 2.5, then the ODBC driver version can be 2.5 or higher.

  See Also: Your ODBC driver documentation for dependencies on an ODBC driver manager

The ODBC driver and driver manager on Windows NT must conform to ODBC application program interface (API) conformance Level 1 or higher. If the ODBC driver or driver manager does not support multiple active ODBC cursors, then it restricts the complexity of SQL statements that you can execute using Generic Connectivity.

The ODBC driver you use must support all of the core SQL ODBC datatypes and should support SQL grammar level SQL_92. The ODBC driver should also expose the following ODBC APIs:

Table 7-1 ODBC Functions 

ODBC Function	Comment
SQLAllocConnect	-
SQLAllocEnv	-
SQLAllocStmt	-
SQLBindCol	-
SQLBindParameter	-
SQLColumns	-
SQLConnect	-
SQLDescribeCol	-
SQLDisconnect	-
SQLDriverConnect	-
SQLError	-
SQLExecDirect	-
SQLExecute	-
SQLExtendedFetch	Recommended if used by the non-Oracle system.
SQLFetch	-
SQLForeignKeys	Recommended if used by the non-Oracle system.
SQLFreeConnect	-
SQLFreeEnv	-
SQLFreeStmt	-
SQLGetConnectOption	-
SQLGetData	-
SQLGetFunctions	-
SQLGetInfo	-
SQLGetTypeInfo	-
SQLNumParams	Recommended if used by the non-Oracle system.
SQLNumResultCols	-
SQLParamData	-
SQLPrepare	-
SQLPrimaryKeys	Recommended if used by the non-Oracle system.
SQLProcedureColumns	Recommended if used by the non-Oracle system.
SQLProcedures	Recommended if used by the non-Oracle system.
SQLPutData	-
SQLRowCount	-
SQLSetConnectOption	-
SQLSetStmtOption	-
SQLStatistics	-
SQLTables	-
SQLTransact	Recommended if used by the non-Oracle system.

OLE DB (SQL) Connectivity Requirements

These requirements apply to OLE DB data providers that have a SQL processing capability and expose the OLE DB interfaces.

Generic Connectivity passes the username and password to the provider when calling IDBInitialize::Initialize().

OLE DB (SQL) connectivity requires that the data provider expose the following OLE DB interfaces:

Table 7-2 OLE DB (SQL) Interfaces

Interface	Methods	Notes
IAccessor	CreateAccessor, ReleaseAccessor	-
IColumnsInfo	GetColumnsInfo (Command and Rowset objects)	-
ICommand	Execute	-
ICommandPrepare	Prepare	-
ICommandProperties	SetProperties	-
ICommandText	SetCommandText	-
ICommandWithParameters	GetParameterInfo	-
IDBCreateCommand	CreateCommand	-
IDBCreateSession	CreateSession	-
IDBInitialize	Initialize	-
IDBSchemaRowset	GetRowset (tables, columns, indexes; optionally also procedures, procedure parameters)	-
IErrorInfo	GetDescription, GetSource	You can also use IErrorLookup with the GetErrorDescription method.
IErrorRecords	GetErrorInfo	-
ILockBytes (OLE)	Flush, ReadAt, SetSize, Stat, WriteAt	Required only if BLOB datatypes are used in the OLE DB provider.
IRowset	GetData, GetNextRows, ReleaseRows, RestartPosition	-
IStream (OLE)	Read, Seek, SetSize, Stat, Write	-
ISupportErrorInfo	InterfaceSupportsErrorInfo	-
ITransactionLocal (optional)	StartTransaction, Commit, Abort	-

OLE DB (FS) Connectivity Requirements

These requirements apply to OLE DB data providers that do not have SQL processing capabilities. If the provider exposes them, then OLE DB (FS) connectivity uses OLE DB Index interfaces.

OLE DB Interfaces for Data Providers to Expose

OLE DB (FS) connectivity requires that the data provider expose the following OLE DB interfaces:

Table 7-3 OLE DB (FS) Interfaces  

Interface	Methods	Notes
IAccessor	CreateAccessor, ReleaseAccessor	-
IColumnsInfo	GetColumnsInfo (Command and Rowset objects)	-
IOpenRowset	OpenRowset	-
IDBCreateSession	CreateSession	-
IRowsetChange	DeleteRows, SetData, InsertRow	-
IRowsetLocate	GetRowsByBookmark	-
IRowsetUpdate	Update (optional)	-
IDBInitialize	Initialize, Uninitialize	-
IDBSchemaRowset	GetRowset (tables, columns, indexes; optionally also procedures, procedure parameters)	-
ILockBytes (OLE)	Flush, ReadAt, SetSize, Stat, WriteAt	Required only if BLOB datatypes are used in the OLE DB provider
IRowsetIndex	SetRange	Required only if indexes are used in the OLE DB provider
IErrorInfo	GetDescription, GetSource	You can use IErrorLookup with the GetErrorDescription method as well.
IErrorRecords	GetErrorInfo	-
IRowset	GetData, GetNextRows, ReleaseRows, RestartPosition	-
IStream (OLE)	Read, Seek, SetSize, Stat, Write	-
ITransactionLocal (optional)	StartTransaction, Commit, Abort	-
ISupportErrorInfo	InterfaceSupportsErrorInfo	-
ITableDefinition	CreateTable, DropTable	-
IDBProperties	SetProperties	-

Because OLE DB (FS) connectivity is generic, it can connect to a number of different data providers that expose OLE DB interfaces. Every such data provider must meet the certain requirements.

Data Source Properties

The OLE DB data source must support the following initialization properties:

• DBPROP_INIT_DATASOURCE
• DBPROP_AUTH_USERID

  Note: Required if the userid has been supplied in the security file

• DBPROP_AUTH_PASSWORD

  Note: Required if the userid and password have been supplied in the security file

The OLE DB data source must also support the following rowset properties:

• DBPROP_IRowsetChange = TRUE
• DBPROP_UPDATABILITY = CHANGE+DELETE+INSERT
• DBPROP_OWNUPDATEDELETE = TRUE
• DBPROP_OWNINSERT = TRUE
• DBPROP_OTHERUPDATEDELETE = TRUE
• DBPROP_CANSCROLLBACKWARDS = TRUE
• DBPROP_IRowsetLocate = TRUE
• DBPROP_OTHERINSERT = FALSE